Evaluation of the process steps of pretreatment, pellet production and combustion for an energetic utilization of wheat chaff

18Citations
Citations of this article
35Readers
Mendeley users who have this article in their library.

Abstract

This paper investigates the potential energetic utilization of wheat chaffvia combustion and necessary process steps such as pretreatment and pellet production as an example of stramineous biomass. Chaffis one out of three main fractions during harvesting and remains usually on the field. Vice versa, it is a potentially so far unexploited biomass resource, which could serve as renewable energy source. Simultaneously, exploiting wheat chaffcould intensify the economic benefit of agricultural land use. The combustion application requires choosing an applicable firing system adjusted to the properties of chaff. The economic feasibility of the combustion application depends strongly on the technical effort, which depends on the fuel. Chaffconsists mainly of husks and straw. Due to the low ash melting point and the high chlorine content of straw, it can be advantageous for the combustion to remove short straw from the chaffby sieving. To evaluate the combustion properties of presorted and original chaffthe elemental composition, the net calorific value, the volatiles and ash content and the ash melting behavior were determined. The efficient logistic of chaffis decisive for its economic exploitation. This is in conflict with the low bulk density of chaffand the resulting high storage volume. Compressing chaffinto pellets optimizes its handling. This vital step for an economic exploitation of chaffwas therefore investigated by this study. Parameters such as water content of the feed, addition of binders and the geometry of the pressing die bores influence the pelletizing success significantly. Thus, these parameters were investigated in this study. The resulting pellets were characterized with standardized methods and compared to the requirements of EnPlus standards in terms of mechanical durability, amount of fines, bulk density and final moisture content. Finally, combustion experiments in a Large-scale Oven for Kinetics Investigation characterized the burnout behavior of the produced pellets. This was compared to pine wood pellets as conventional fuel. The performed investigations show that the pellet production and the subsequent combustion of wheat chaffpellets is a feasible approach for an energetic utilization.

Cite

CITATION STYLE

APA

Weiß, B. D., & Glasner, C. (2018). Evaluation of the process steps of pretreatment, pellet production and combustion for an energetic utilization of wheat chaff. Frontiers in Environmental Science, 6(JUN). https://doi.org/10.3389/fenvs.2018.00036

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Save time finding and organizing research with Mendeley

Sign up for free