Structural and transport properties of BTDA-TDI/MDI co-polyimide (P84)-silica nanocomposite membranes for gas separation

71Citations
Citations of this article
59Readers
Mendeley users who have this article in their library.
Get full text

Abstract

Fumed nano-SiO 2 particles were modified with a silane coupling agent (3-aminopropyl)triethoxysilane and they were subsequently incorporated into P84 polymer matrix to form nanocomposite membranes. Fourier transform infrared spectroscopy (FTIR), thermogravimetric analysis (TGA) and X-ray photoelectron spectroscopy (XPS) were used to determine the effectiveness of binding the (3-aminopropyl)triethoxysilane onto the surfaces of the SiO 2 particles. Physical properties including the membrane density, the stress modulus, the tensile strength and the glass transition temperature of the resulting nanocomposite membranes were obtained. The morphology of the membranes was observed using scanning electron microscopy and transmission electron microscopy. The composite membranes based on the modified SiO 2 showed better bonding morphology at the polymer/particle interfaces, higher stress modulus and tensile strength, and significantly higher glass transition temperature as compared with those of the composite membranes based on the pristine SiO 2 particles. The effects of the SiO 2 surface modification and the SiO 2 loadings on the gas separation capability of the resulting composite membranes were investigated. The permeability of all gases (CO 2, O 2, N 2 and He) increased with increasing volume fraction of the inorganic filler. The composite membranes with less than 0.14 volume fraction of the modified SiO 2 had comparable selectivity as that of the pure P84 membrane and significantly higher tensile modulus and stress than the latter. A decrease in selectivity was observed with increasing modified SiO 2 volume fraction. With the same weight percentage of the inorganic filler, the composite membranes based on the modified SiO 2 had higher selectivity than that of the composite membranes based on the pristine SiO 2. The permeability of the composite membranes was compared with the theoretical predictions based on the Maxwell equation and the free volume theory. The Maxwell equation predicted lower values than the experimental data whilst the free volume theory produced acceptable predictions except for a large discrepancy in the permeability value for the P84/25%SiO 2 composite membrane. © 2012 Elsevier B.V..

References Powered by Scopus

A treatise on electricity and magnetism

5515Citations
N/AReaders
Get full text

The upper bound revisited

5112Citations
N/AReaders
Get full text

Biofibres, biodegradable polymers and biocomposites: An overview

2848Citations
N/AReaders
Get full text

Cited by Powered by Scopus

State-of-the-art membrane based CO<inf>2</inf> separation using mixed matrix membranes (MMMs): An overview on current status and future directions

769Citations
N/AReaders
Get full text

ZIF-90/P84 mixed matrix membranes for pervaporation dehydration of isopropanol

155Citations
N/AReaders
Get full text

Mixed-matrix membranes for CO<inf>2</inf> separation: Role of the third component

133Citations
N/AReaders
Get full text

Register to see more suggestions

Mendeley helps you to discover research relevant for your work.

Already have an account?

Cite

CITATION STYLE

APA

Shen, Y., & Lua, A. C. (2012). Structural and transport properties of BTDA-TDI/MDI co-polyimide (P84)-silica nanocomposite membranes for gas separation. Chemical Engineering Journal, 188, 199–209. https://doi.org/10.1016/j.cej.2012.01.043

Readers' Seniority

Tooltip

PhD / Post grad / Masters / Doc 24

62%

Researcher 12

31%

Professor / Associate Prof. 3

8%

Readers' Discipline

Tooltip

Engineering 15

41%

Chemical Engineering 11

30%

Chemistry 8

22%

Materials Science 3

8%

Save time finding and organizing research with Mendeley

Sign up for free